Model review · Jura Impressa C9
Jura Impressa C9 review: the $695 way into one-touch cappuccino
Short answer: the Impressa C9 is an older Jura – the C series ran through the early 2010s – that makes a proper espresso and a one-touch cappuccino from simple buttons and a rotary dial, with nothing on it that is hard to service. Refurbished with a new brew unit it is around $695, which makes it the cheapest one-touch milk Jura we sell. What you give up against a current E8 is the pulsed extraction, the quieter grinder and the finer milk foam. What you get is a Swiss automatic with a 12-month warranty for the price of a mid-range pod machine.
- One-touch cappuccino and espresso, black coffee at adjustable strength, hot water – the everyday menu without a screen.
- About 1.9-litre tank and 200g hopper: fine for one or two people, refilled every couple of days.
- Simple electronics and a robust brew unit; parts remain available and it is one of the easiest Juras to service.
- Refurbished around $695 at the time of writing (original RRP about $2,100); 12-month warranty; $50 freight or free Melbourne pickup; Afterpay and PayPal Pay in 4 available.
What you get for $695
A Jura. That still means a burr grinder feeding a full brew unit under pressure, a thermoblock, and one-touch milk – the same architecture as the machines four times the price, a generation or two older. The C9 was built as Jura’s accessible one-touch machine and it does the job it was built for: press a button, get a cappuccino. Ours have been through the full rebuild – brew unit replaced, every seal renewed, pump pressure tested, grinder recalibrated – so the wearing parts are new even though the design is not.
What it does well
- Espresso and long blacks. Good, consistent, adjustable strength. Not the body of a pulsed-extraction E8, but a real espresso.
- One-touch cappuccino. Milk drawn from a container, frothed and poured with the coffee at one press. The foam is coarser than a modern Fine Foam Frother’s, but it is one-touch and it rinses.
- Simplicity. A rotary dial and a few buttons. Older relatives, holiday houses and offices that want a machine nobody has to learn like this.
- Serviceability. The C series is straightforward to work on and parts are plentiful, which is why it makes sense to refurbish at all.
What it gives up to a current E8
| Impressa C9 (refurbished ~$695) | E8 (refurbished ~$1,049) | |
|---|---|---|
| Extraction | Conventional pump | Pulse Extraction Process – fuller short shots |
| Milk | One-touch cappuccino, coarser foam; latte and flat white need a second step | 17 one-touch drinks with fine foam |
| Grinder | Older, louder | Professional Aroma Grinder, quiet |
| Display | Text display and dial | 2.8-inch colour display |
| Capacity | 1.9 L, 200g | 1.9 L, 280g |
| Parts and service | Available, simple | Available, current |
The E8 is the better machine. The C9 is the better machine for $695.
Who should buy the C9
A household on a tight budget that wants a Swiss automatic with milk; a second machine for a holiday house or a granny flat; a small office of two or three people; anyone who has been using pods and wants to spend the least possible to move to beans without buying a Breville they will not use. Black-coffee-only drinkers can spend less again on a Z5 or the ENA Micro A1.
Looking after an older Impressa
The same as any Jura: dry medium-roast beans, a water filter or descaling on prompt, the milk system rinsed after each session, and a service every couple of years. The C9 in particular rewards keeping the frother clean – the C9 manual and care guide covers water hardness settings and frother cleaning.
Refurbished Jura Impressa C9, around $695
Rebuilt brew unit, 12-month warranty, photos of your machine before it ships. Afterpay and PayPal Pay in 4 available. $200 off with a trade-in.
Frequently asked questions
Is the Jura Impressa C9 still worth buying?
Refurbished with a new brew unit and a warranty, yes – it is the cheapest one-touch milk Jura available and simple to service. Buy it for the price, not the features.
Does the C9 make a flat white?
It makes a one-touch cappuccino; a flat white or latte means frothing milk and then making the espresso, two steps. For one-touch flat whites, the E8.
Can you still get parts for an Impressa C9?
Yes. The C series is one of the easier Juras to service and parts remain available.
How old is a Jura C9?
The C series dates from the early 2010s. We rebuild the wearing parts, so age matters less than the rebuild; ask if you want the specific unit’s details.
How much is a refurbished Jura C9?
Around $695 at the time of writing, with a 12-month warranty.
The machines in this guide, refurbished and ready to go
Every machine below has been through our Melbourne workshop: new brew unit, every seal renewed, pumps and sensors tested, then run on real coffee before it is listed. You see photos of the exact unit before it ships, and it is covered for 12 months.
- Rebuilt and bench-tested in Melbourne
- 12-month parts & labour warranty
- Photos and a video of your actual machine before it ships
- $200 off with any old machine traded in
Not sure which model? Our model picker by budget and use takes two minutes.